PLAS-LABS

800-BIBO/PORT + 3 more

Bag-In / Bag-Out Port

800-BIBO/PORT, Bag-In / Bag-Out port includes a 14” x 48” long ArmorFlex TM polypropylene bag for safe removal of HEPA filters.

800-IRIS/S + 3 more

Bare Hand (Gloveless) Ports

1. #800-IRIS/S REPLACEMENT IRIS SLEEVES and CUFFS. Refer to #800-IRIS for description. Buy Now

800-BLANK/P/SP + 1 more

Cable Pass-Through

Numerous systems are available for gaining access into any glove box or isolator. Some of these can be set up so as not to disturb the interior atmosphere of the chamber.

Carts / Trolleys

Adjustable Height Carts These carts are very useful for increasing portability and laboratory space. All carts have anti-scuff casters including brakes and locks. Carts also feature a cushioning system that minimizes vibration, shocks, and wear and tear on chambers. The Plas-Labs' lift carts are quick and quiet. The height adjusts from 25" to 50". Weight capacity is 440 lbs. Different sizes are availabe to accommodate different Plas-Labs' products. Model Number: Table top dimensions: For Plas-Labs' Glove box: CART-LIFT/GB 35.25"wide x 31.5" deep. 810-SG10, 830-ABC, 818-GB, 855-AC, 857-OTA CART-LIFT/ABB. 43" wide x 31.5" deep. 810-SG20 and 830-ABB CART-LIFT/ABD. 59" wide x 31.5" deep 810-SG30 and 830-ABD CART-LIFT/GBB. 70.75" wide x 31.5" deep. 818-GBB, 830-ABE, 810-SG40, 855-ACB, 850-NBB

Doors, Additional Access Doors

Addtional flat side access doors can be added to most PLAS-LABS' glove boxes. These are factory mounted when a new PLAS-LABS' glove box is purchased. Access doors allow the researcher to introduce larger equipment into the glove box.

800-H8 + 7 more

Filtration

We offer HEPA filtration setups in several different configurations depending upon your application need. All setups include our #800-MAGNA, Magnehelic Gauge indicators.

800-FLOW + 1 more

Flow Meters

800-FLOW - CHAMBER FLOW METER KIT (0-10 LPM, factory mounted includes mounting bracket, hose, and ring clip) Buy Now

800-BLUE

Gel Sealant

The 800-BLUE, Gel Sealant System, was specifically developed for the clean room industry to seal HEPA filters.

800-GH + 9 more

Gloves

PLAS-LABS offers a variety of glove box gloves, from different materials to different sizes to different designs.

800-HEATER + 1 more

Heater

The Catalyst Heater Function Each PLAS-LABS' anaerobic chamber includes a programmable catalyst heater unit. The catalyst heater has two main functions. It reduces trace amounts of Oxygen and it maintains the correct incubation temperature level for cultivating anaerobes (35 to 39 degrees C).

800-HCB + 2 more

Humidity

How It Works: Set your desired humidity level and the humidity control box controls and monitors the humidity level within the main working chamber. If the moisture level is above the set point, the controller turns on the circulation pump and flows air through the drying train canisters. Once the desired humidity level is reached, the controller turns the pump off. If the moisture level is below the set point, the controller turns on the nebulizer to increase the humidity.

Lighting

Our new “Bright Light” system is guaranteed to have a 40,000 hour bulb life. Illumination of the glove box or isolator is dramatically increased. Heat production is minimized making the unit much more comfortable in which to work.

800-MICRO

Microscope Viewing Port

800-MICRO MICROSCOPE VIEWING PORT is 6.25” Ø (159 mm) and includes the port, Hypalon™ cover, and stainless steel worm clamp. The Hypalon™ cover allows the microscope oculars to protrude from the chamber to permit exterior viewing of your research materials. Specify single or double oculars.

800-DOI + 1 more

Oxygen Analyzers

800-DOI, Digital Oxygen Analyzer This portable trace oxygen analyzer features three range autoranging (0-100/1,000/10,000 ppm), and advanced electrochemical oxygen sensor, and built-in temperature compensation. Oxygen values are continually monitored and displayed on an easy to read 0.4" high x 4.5" digit liquid crystal display (LCD). The analyzer is equipped with three oxygen alarm relays, one status alarm, audible alarm, three front panel LEDs for visual indication of an alarm condition, and two analog outputs (4-20 mADC and 0-2 VDC) for use with recorders or data-loggers. The 800-DOI can be housed within the glove box or mounted externally. Outside Dimensions: 6.5" wide x 6.2" deep x 10.9" high Powder Requirements: 115/230 VAC; 50-60 Hz. Warranty: Three (3) year electrical; one (1) year sensor Accuracy: ±1% of full scale Resolution: 0.1 ppm for ranges < 100 ppm 1.0 ppm for ranges > 100 ppm Operating Temperature: 32 to 133°F (0-50°C) Gas Connections: 1/4" stainless steel compression fittings Optional Pump: 0.5-1.0 LMP sampling Relays: SPDT rated at 10 amps@115/230 VAC and 30 VDC

800-PLUG/8 + 1 more

Plugs

Ports, Additional

800-CPS + 1 more

Pressure Valves

The 800-CPS, Controlled Purge System, is designed to monitor and control positive pressure within any of our glove boxes, isolators, or desiccators.

800-PUMP

Pumps

800-PUMP, Diaphragm pump is mounted on a .375” plastic base with suction cup feet for stability.

800-SHELF-I + 3 more

Shelf Packages

Suspended (sliding) Shelf packages can be added to most of our various glove boxes, isolators and chambers. They greatly increase the culture plate holding capacity of the chamber. Sliding shelves can be pushed to the rear of the chamber when not in use.

800-AS/SPI

Static Eliminator

800-AS/SPI, “Counter SPI” Work Station Ionizer effectively eliminates all static charges within 36” of unit. The operation of the Work Station Ionizer is simple; place the unit on a flat surface and turn the power on. Unit features include: ion pulse rate adjustment, ion balance adjustment and a compact footprint. The Work Station Ionizer is virtually maintenance free; the emitter points should be cleaned with a swab dampened with Isopropyl Alcohol when visual accumulation of dust or powders occur. The 800-AS/SPI is a non-air assisted static reducer (no blower or fan). No particle contaminants are introduced into the chamber.

800-T

Transfer Chambers

PLAS-LABS offers a variety of unique miscellaneous accessories for our glove boxes, isolators, and chambers. All accessories are easily adaptable to standard or customized research equipment. If you are doing research requiring unique enclosures, please contact us. We might be able to assist you in your research efforts.

800-IN/OUT + 7 more

Valves

Various valves, gauges, and meters can be added to any glove box, isolator, or desiccator. These are normally mounted in standard locations, but we can easily change set ups depending upon your own preferences. 800-IN/OUT Valve, with 1/4" serrated valve on the inside of the glove box, and a 1/4" serrated valve on the outside of the glove box.

800-BANJO

VHP Options

PLAS-LABS' glove boxes can be equipped with any VHP (Vaporized Hydrogen Peroxide) port. Port types will vary with each VHP manufacturer.