Valves

Various valves, gauges, and meters can be added to any glove box, isolator, or desiccator. These are normally mounted in standard locations, but we can easily change set ups depending upon your own preferences.

800-IN/OUT Valve, with 1/4" serrated valve on the inside of the glove box, and a 1/4" serrated valve on the outside of the glove box.

#1. 800-IN/OUT, Complete valve package includes ground key cock valve, with flanges, and inner/outer serrated nipples.
#2. 800-GOFAU, Goose Neck Water Faucet. Factory mounted, internal faucet has a swivel goose neck.
#3. 800-FLOW, Flow Meter Kit. Helps regulate gas flow at lower incoming pressures. Kit includes flowmeter, mounting bracket, hoses and ring clips. Range: 0-10 LPM.

#5. 800-FLOW/D. SMALL FLOW METER used for smaller chambers and desiccators. Helps regulate gas flow at lower incoming pressures. Kit includes flowmeter, mounting bracket, hoses and ring clips. Range “5-50 SCFH.”

#6. 800-BANJO. BANJOTM TYPE FITTINGS for use with VHP sterilization equipment and procedures. O.D. is 1.375” (35 mm). I.D. is .875” (23 mm).

#7. 800-NLP. SERRATED NIPPLE ONLY. Normally attached to the #800-VALVE on the inside of the chamber.

#8. 800-VALVE. GROUND KEY COCK VALVE (Only). Valve with flange can also be mounted on a 90˚ elbow if desired. Specify N2 or VAC (Vacuum) valve label.

#9. 800-PRV. PRESSURE RELIEF VALVE. Minimizes the chance for chamber implosion or explosion because of incorrect pressure level.