SomnoFlo® O2Care
Blend air and O₂
Request QuoteItem # SF-06
Category: Anesthesia
Recent research has suggested that pure oxygen can cause unintended off-target effects during veterinary anesthesia, but 21% oxygen isn’t always enough to prevent hypoxia. Custom gas blends are cumbersome and external gas mixers can be cumbersome, expensive, or difficult to use.
SomnoFlo® O2Care solves these problems by blending ambient air and 100% compressed oxygen to deliver the ideal anesthetic carrier gas composition for your animals. Now you can get the oxygen supplementation that they need, without any external gas mixers or custom gas blends!
SomnoFlo O2Care allows you to connect a pure oxygen source and easily adjust the carrier gas composition to 21%, 35%, 50%, 70%, or 100% oxygen. Perfect for long procedures where supplemental O2 is required, for recovery phases, emergencies, or anyone looking to refine their anesthetic protocols.
(SomnoFlo O2Care operates using an internal air pump with ambient air or with compressed gas. If your regulator exceeds 15psi, the SOMNO-7305 Preset Pressure Reducer is required to regulate the pressure)
What you get from SomnoFlo O2Care
Ultra-low flow rates (as low as 50 mL/min)
No annual calibration or certification needed
Minimal waste anesthetic gas exposure
Compact, easy-to-use touchscreen interface
What your peers say about SomnoFlo
Dr. David Coggin-Carr
University of Vermont
“Everything has been going very well – we have done a ton of surgeries in the last few weeks and used minimal isoflurane with no obvious exposures, which my technician is thrilled with.”
Product videos
Playlist
2 Videos
About SomnoFlo O2Care
Overview
With SomnoFlo O2Care, there’s no need to compromise between safety and convenience. Whether you’re aiming to reduce off-target effects from pure oxygen or avoid the hassle of external mixers, O2Care delivers. Its intuitive design lets you fine-tune oxygen levels to match each animal’s needs—no custom gas blends, no complicated equipment. Just precise, reliable oxygen delivery, every time.
- Easily connect the system to an oxygen source
- Set O2 level
- Start precise vaporization
- Safer research with reproducable results!
Smart oxygen control, simplified
Lower anesthetic use, bigger cost savings
Estimated yearly operational savings
Product specifications
| Flow rate | |
|---|---|
| Flow Rate | 100 mL/min to 1,000 mL/min |
| Manual Override | Yes |
| Sensor | Electronic flow sensor |
| Oxygen presets | 35%, 50%, 70%, 100% |
| Application | |
|---|---|
| Multi-animal | Yes |
| Stereotaxic | Yes |
| Warranty | |
|---|---|
| Standard (included) | 1-year |
| Premium (optional) | 3-year |
| Operation | |
|---|---|
| Modes | Compressed gas |
| Anesthetic | Isoflurane and sevoflurane |
| Presets | User-selectable |
| Alarms | Yes |
| Purge | Yes |
| Maintenance | No annual calibration |
| Filling and Delivery | |
|---|---|
| Method | Direct from bottle |
| Capacity | 100 mL and 250 mL |
| Accuracy | 0.1% |
Warranty information
| Standard | Extended | Premium | |
|---|---|---|---|
| Coverage period | 1 year | Additional 2 years | Additional 2 years |
| Controller | |||
| Loaner equipment (for use under warranty repairs) | | | |
| Loaner equipment — Shipping (for use under warranty repairs) | | ||
| Onsite installation & training |
Training
| ||
| Expedited repairs (any repairs) |
24 hrs
|
Note:
- Damage or failures that result from abuse, negligence, or misuse are not covered under warranty.
- Expedited repair time starts the business day after product is received and ends when shipped to customer.
- Customer is responsible to inform Kent Scientific when making a warranty claim.
- Extended warranties purchased after the original system sale are subject to approval. It may be necessary to have the controller returned for inspection before the purchase of the extended warranty.