Maintain molecular integrity
Aerosolizes a broad range of liquid formulations without altering or damaging the compound’s molecular integrity
Aeroneb® Lab Control Module
The Aeroneb® Lab Nebulizer uses a high-efficiency aerosolization technology for use in pre-clinical aerosol research and inhalation studies, providing a valuable link between pre-clinical and clinical product development. Using Aerogen’s OnQ™ Aerosol Generator, the Aeroneb is designed to produce a highly respirable aerosol of virtually any drug in liquid. It produces a fine droplet, low-velocity […]
Request QuoteItem # NEB-7000
Category: Aerosol nebulizers
The Aeroneb® Lab Nebulizer uses a high-efficiency aerosolization technology for use in pre-clinical aerosol research and inhalation studies, providing a valuable link between pre-clinical and clinical product development.
Using Aerogen’s OnQ™ Aerosol Generator, the Aeroneb is designed to produce a highly respirable aerosol of virtually any drug in liquid. It produces a fine droplet, low-velocity aerosol without compressed air, and integrates easily into existing exposure and aerosol testing equipment.
Aeroneb is a registered trademark of Nektar Therapeutics.
What you get on day one
Nebulizer and components are latex free
Bridge preclinical and clinical studies
Utilizes the same OnQ technology used in two commercially available nebulizer products, providing a bridge from preclinical to clinical studies
Includes a universal adapter, good from 100V to 240V
Produces a high-quality respirable aerosol with extremely low residual volume
Note: The nebulizer delivery system requires the use of a flow regulated air source such as a pump or compressed gas source (not included) to move the aerosol through the tubing towards the animal.
Product versions
Aeroneb Lab Nebulizer, Small VMD
- Flow rate: >0.1 mL/min
- Particle size: VMD between 2.5 – 4.0 µm
- Residual volume: <0.2 mL
Aeroneb Lab Nebulizer, standard VMD
- Flow rate: >0.3 mL/min
- Particle size: VMD between 4.0 – 6.0 µm
- Residual volume: <0.2 mL: <0.2 mL
Product specifications
| Nebulizer unit dimensions | 50 mm W x 45 mm H x 50 mm D |
| Control module dimensions | 75 mm W x 33 mm H x 131 mm D |
| Control module cable | 1.8 m long |
| Nebulizer unit weight | 25 g nebulizer unit and filler cap |
| Control module weight | 178 g, including cable |
| Nebulizer unit capacity | Maximum 10 ml |
| Power source | Can operate from AC/DC adapter (input 100 to 240 VAC 50 to 60 Hz, output 9V) OR an external 9V DC power supply |
| Power consumption | <2.57 watts |